Viscosity Standards
Brookfield Engineer Labs Viscosity Standard General Purpose Silicone Fluids (5000cps)
Viscosity Standard General Purpose Silicone Fluids (5000cps) |
Brookfield Engineer Labs General Purpose Silicone Fluids, 1000 CPS
Brookfield Viscosity Standards provide a convenient, reliable way to verify the calibration of your Brookfield Laboratory Viscometer/Rheometer. The fluids are stored in glass bottles. Silicone viscosity standards supplied in ½ liter (1 pint) glass jars complete with a certificate of calibration.
Brookfield Engineer Labs General Purpose Silicone Fluids, 12500 CPS
Brookfield Viscosity Standards provide a convenient, reliable way to verify the calibration of your Brookfield Laboratory Viscometer/Rheometer. The fluids are stored in glass bottles. Silicone viscosity standards supplied in ½ liter (1 pint) glass jars complete with a certificate of calibration.
Brookfield Engineer Labs SILICONE FLUID: 100000CPS@25C
General purpose Silicone Fluid, calibrated at 25degree C
Brookfield Engineer Labs SILICONE FLUID: 5CPS @ 25C
General purpose Silicone Fluid, calibrated at 25degree C
Brookfield Engineer Labs General Purpose Silicone Fluids, 100 CPS
Brookfield Viscosity Standards provide a convenient, reliable way to verify the calibration of your Brookfield Laboratory Viscometer/Rheometer. The fluids are stored in glass bottles. Silicone viscosity standards supplied in ½ liter (1 pint) glass jars complete with a certificate of calibration.
Brookfield Engineer Labs VISCOSITY STD 200CPS 500ML
200 CPS General Purpose Mineral Oil Viscosity Standard
Brookfield Engineer Labs General Purpose Silicone Fluids, 100 CPS
Brookfield Viscosity Standards provide a convenient, reliable way to verify the calibration of your Brookfield Laboratory Viscometer/Rheometer. The fluids are stored in glass bottles. Silicone viscosity standards supplied in ½ liter (1 pint) glass jars complete with a certificate of calibration.
Viscosity Standard Anton Paar N415 (H) 100 mL - 1100/330/32 mPa.s
Viscosity Standard AP N415c for adjustments and check measurements. Exact viscosity and density values are submitted with an UKAS accredited certificate, according to ISO/IEC 17025
Canon Instrument Co * HAZARD * N1.0 Viscosity Standard 0.45 L
CANNON general purpose standards meet the precision specifications of ASTM D445/D446 and ISO 3104/3105. Lot specific data is provided with each standard.
Brookfield Engineer Labs General Purpose Oil, B600, Nominal Viscosity cP 600
Accuracy: +/-1% of viscosity valueAppropriate for use at shear rates greater than 500 sec-1Recommended for use with cone/plate Viscometers at viscosities above 5,000 cPBrookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes Note: Other oil fluids are available - call for detailsBrookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers
Brookfield Engineer Labs VISCOCITY STANDARD - 1060CP
1060 CPS General Purpose Mineral Oil Viscosity Standard
Brookfield Engineer Labs CAP Oil Fluids 150ml
89 CPS Mineral Oil Standard for Low Temp High Torque CAP with Cone 1 Spindle